16 GOLD 50ml METALLIC Enamel Tinlet
16 GOLD 50ml METALLIC Enamel Tinlet
A solvent-based enamel paint with a metallic finish.
Usage
A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability).
Application
Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry.
Drying Time
Metallic hard dry in approx10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night)
Coverage
A 50ml tinlet covers approx 1metre squared depending on thickness of application
How to Clean
Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.
Keep out of reach of children. Contains cobalt zirconium carboxylate and ethyl methyl letoxime. May produce an allergic reaction. Paint: UN1263 Flammable. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. Use only in well-ventilated areas. If swallowed, seek medical advice immediately and show container label.
