Please note that this item can only be delivered to US addresses
In this video we show you how to use Humbrol Metalcote Spray to achieve dazzling metallic finishes on your models and craft projects.
Humbrol products used in this video:
- Humbrol Polished Steel Metalcote No. 27003 - 150ml Acrylic Spray Paint - AD6996
- Humbrol Polished Aluminium Metalcote No. 27002 - 150ml Acrylic Spray Paint - AD6995
We strongly suggest you practice the techniques using a test piece first.
Creates a polished look once buffed.
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability.
Depends on application and thickness of coats.
Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Once dry, polish with a soft dry cloth.
30 minutes - for best results leave for 24 hours
How to Clean
Hold can upside down after use and depress nozzle for a few seconds to clean. Permanent once dry.
Caution: Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 50 degrees Celsius. Do pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Vapours may cause drowsiness and dizziness. Keep out of reach of children. Keep away from sources of ignition - No smoking. Do not breathe vapour / spray. Use only in well-ventilated areas. Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. EXTREMELY FLAMMABLE, DANGEROUS FOR THE ENVIRONMENT
Technical Specification & Detail